topprevnextend operation manual

5. Parameter Reference

5.5. AMPLIFIER

amplifier section

  1. ENV
  2. LFO
  3. LFO Depth
  4. Velocity Sens

The amplifier controls the signal amplitude with an envelope. Also, the additional modulation with a LFO can be used.


5.5.1. ENV

Selects an envelope used for the amplitude modulation.

You can select one of ENV1 or ENV2.


5.5.2. LFO

Selects a LFO used for the amplitude modulation.

You can select one of LFO1 or LFO2. Its depth is set by LFO Depth.


5.5.3. LFO Depth

Sets the LFO depth.

LFO depth is bidirectional. If you do not use LFO, set to the center (0%).


5.5.4. Velocity Sens

Sets the MIDI note on velocity sensibility for the amplitude modulation.

Setting the sensitivity to 100%, the depth varies from 0 to 200% with the note on velocity. Setting to 0% makes the constant for all velocities.

velocity sens relation


topprevnextend GC